3.5.- CONNECTIONS
The
CEM-C30
has terminal covers to cover the top of the terminal box and the fixing screws
(
).
Figure 3: Terminal covers of the CEM-C30�
The fixing screws are of the mixed type, allowing the use of PZ2 and flat head screwdrivers.
The measurement circuit can be connected with cables with a cross-section of up to 20 mm
2
.
The power supply and impulse output connection may be made with cables with a cross-sec-
tion of up to 1.5 mm
2
.
Once connected, the unit can be protected with two connection seals (
Figure 4: Seal of the CEM-C30�
11
Instruction Manual
CEM-C30
