Circutor CEM-C12c, Instruction Manual

Page: 7 / 28

3.- DEVICE INSTALLATION
3�1�- PRELIMINARY RECOMMENDATIONS
In order to use the device safely, it is critical that individuals who handle it follow the
safety measures set out in the standards of the country where it is being used, use the
necessary personal protective equipment, and pay attention to the various warnings
indicated in this instruction manual.
The
CEM-C12c
device must be installed by authorised and qualified staff.
The measuring systems switched off before handling, altering the connections or replacing the device.
It is dangerous to handle the unit while it is powered.
Also, it is critical to keep the cables in perfect condition in order to avoid accidents, personal injury and
damage to installations.
The manufacturer of the device is not responsible for any damage resulting from failure by the user
or installer to observe the warnings and/or recommendations set out in this manual, nor for damage
resulting from the use of non-original products or accessories or those made by other manufacturers.
If an anomaly or malfunction is detected in the device, do not use the device to take any measurements.
Inspect the work area before taking any measurements. Do not take measurements in dangerous ar-
eas or where there is a risk of explosion.
Disconnect the device from the power supply before maintaining, repairing or handling
the device's connections.
Please contact the after-sales service if you suspect that there is an operational fault
in the device.
7
Instruction Manual
CEM-C12c