Front Panel Description
The following is an explanation of the function of each of the front
panel controls and connectors.
(1) POWER ON - This is the main power switch
(2) POWER ON LED - This LED indicates that the power is on.
(3) VOLTAGE/CURRENT METERS - These four meters indicate the
output voltage and current as measured at the output terminals.
(4) FUNCTION SWITCH - This switch is used to select the
INDEPENDENT, SERIES or PARALLEL modes.
(5) FUNCTION LED - This LED indicates the “mode” of the power
supply (Independent, Series or Parallel).
(6) METER ZERO - Each meter has a mechanical screw adjustment
for setting the zero point.
(7) 5 VOLT / 3 AMP OUTPUT TERMINALS
(8) OVER LAMP - When this output is overloaded or shorted, the
light will be ON.
(9) CV LAMP - When the unit is working normally, the lamp will
be ON. But when the unit is overloaded or shorted, the lamp
will be OFF.
(10) CC LAMP - When the unit is in overload or short, the light will
be ON.
(11) GROUND TERMINAL
cont’d...
– 5 –
