– 8 –
1. DC VOLTAGE MEASUREMENT
WARNING
: MAXIMUM INPUT IS 450V DC. USE EXTREME CAUTION WHEN
WORKING WITH HIGH VOLTAGES. NEVER APPLY THE TEST LEAD TO THE MEASUR-
ING CIRCUIT WHEN CHANGING THE POSITION OF THE FUNCTION SWITCH.
NOTE: The meter is auto ranging and will automatically display the correct
voltage within the overall range of the meter.
➔
Set the function switch to
VOLT/Hz/%
.
➔
If ʻDCʼ does not show on the display, push the SELECT button until
it appears.
➔
Apply the test leads to the circuit to be measured. Ensure that the
black lead is connected to the negative side of the circuit and red
lead to the positive.
➔
Read the displayed voltage.
➔
If the minus (-) sign appears it means the voltage is negative at the
point being measured.
➔
If ʻOLʼ appears on the display, it indicates over-range. Immediately
remove test leads from the measuring circuit to avoid any damage
to the meter. The input voltage should not exceed the measure-
ment capability of this meter.
2. AC VOLTAGE MEASUREMENT
WARNING
: MAXIMUM INPUT IS 450V AC. USE EXTREME CAUTION WHEN
WORKING WITH HIGH VOLTAGES. NEVER APPLY TEST LEADS TO THE MEASURING
CIRCUIT WHEN CHANGING THE POSITION OF THE FUNCTION SWITCH.
NOTE: The meter is auto ranging and will automatically display the correct
voltage within the overall range of the meter.
➔
Set the function switch to
VOLT/Hz/%
.
