Circontrol Raption 150 Compact, Installation Manual

Page: 34 / 40

29
Raption 150 Compact Installation Manual
G
How to use and configure
In order to use and configure the Charging Station there is an User Manual. To get it,
download it from the Expert Area or send a mail to
support@circontrol.com .
Note:
Ask Circontrol PS-Support Department in order to register in the Circontrol
Expert Area.
F
Verification
Once completed the entire installation procedure, check the following points:
• Complete the Commissioning checklist.
• Check that all the MCB, RCD, Main Circuit Breaker and Disconnectors are powered
on.
• Check that all safety labels are correctly placed.
• Close the Charge Point’s doors. The Charge Point has a security switch (anti-
tamper protection) installed that will avoid any charging session if the doors are
opened.
• Check that all beacons are illuminated in green.
• Verify that each EV connector is in good condition.
• Make sure the ventilation air flow is correct and there is not any obstruction at the
air inlets and outlets.
• Check for abnormal noise while charging a vehicle.