© CIRCONTROL
www.circontrol.com
Wallbox eHOME
INSTRUCTION & INSTALLATION MANUAL
10
4.2.5 MAXIMUM OUTPUT CURRENT MINIDIPS ERROR
4.2.6 TEMPERATURE ERROR
•
If this on board current limit
selection is not setup according to
the hardware features, the unit
detects it and shows this error.
•
In this case, the status LED bar
turns into red and flashes in a
sequence of five blinks.
•
When the unit temperature is below
a certain value, it is detected by the
unit.
•
In this situation, the status LED bar
turns into orange blinking.
•
In the meantime, if the unit is
supplied with heater (optional), it
starts
heating
the
inside
components until the operating
temperature is reached. Then the
unit starts charging again.
