Cirago UDA2000, User Manual, Page: 9 / 22

PAGE
·
13
PAGE
·
14
To set the display
1. Open WDP.
2. Set the display options. Refer to the table below for details on each option.
Table 1: WDP Options
To control the behaviour of an attached DisplayLink display, it is also possible to use Windows Key+P to display a
menu (and cycle through it) to switch mode.
Menu Sub-Menu
Description
Display Use the drop down list to select a display to be configured.
Resolution
Use the drop down list and user the slider to choose a
resolution.
Landscape Sets the display to landscape view.
Orientation
Multiple
displays
Portrait
Sets the display to portrait mode.
Landscape (flipped) Sets the display to upside down landscape mode.
Portrait (flipped) Sets the display to upside down portrait mode.
Duplicates these displays Reproduces the main display on the second display.
Extend these displays Extends the main display onto the secondary display.
Show Desktop only on 1
The desktop appears on the display marked 1. The display
marked 2 becomes blank.
Shows Desktop only on 2
The desktop appears on the display marked 2. The display
marked 1 becomes blank.
1. Select the Windows Key + P.
The following menu appears.
To control the Display
2. Click on one of the options.
The display updates to reflect your choice.
4. Using the USB Graphics Software