Cirago UDA2000, User Manual, Page: 7 / 22

The following section shows you how to install the USB Graphics Adapter software on different operating systems.
Note: If you have v3.x, R4.1 or R4.2 DisplayLink software installed you must uninstall it, using the Windows
Add/Remove Programs feature, before installing this release. Devices will continue working after this release is installed.
The preferred method of installation is using Window 7's Windows Update facility.
To Install the Software on Windows 7 Update
1. Connect your UGA device via the USB cable to your PC. Windows
detects the new hardware and automatically downloads the driver.
2. Once downloaded, the install will run
The DisplayLink software end user licence agreement window opens.
3. Click I Accept.
The DisplayLink Core software installs
Note: The screen may flash or go black during the install.
Alternatively you may install the software from a website download
or CD-ROM:
Installing the USB Graphics Software
To Install the Software on Windows 7/Vista/XP/2000
Important! Do not connect a UGA device/screen to your PC before
the install.
1. Double click on Setup.exe or click from Autorun setup cover
page.
The Windows User Account Control window opens (if enabled in
the OS).
2. Click Yes .
The DisplayLink software end user licence agreement window
opens.
3. Click I Accept .
DisplayLink Core software and DisplayLink Graphics installs.
PAGE
·
09
PAGE
·
10
3. Installing the USB Graphics Software