Cirago UDA2000, User Manual, Page: 12 / 22

You can also configure the USB Graphics Adapters from the Windows Display Properties dialog box.
1. Right-click on the Desktop.
2. Click Personalize.
3. Click Display Settings.
The Display Settings window opens.
Setting the Display into Extend Mode
Use this procedure when you want to extend the Windows desktop to the DisplayLink display. This allows many different
applications to be spread over multiple displays, to be able to see multiple applications at the same time.
To set the display to Extend Mode using Windows Display properties
1. Select Extend the desktop onto this monitor checkbox (1 in Figure 1).
2. Arrange the screen resolution using the Resolution slide bar. (2)
3. Select the colour quality from the Colors drop-down list. (3).
4. Arrange its position with respect to the other monitors on the extended desktop in using the drag area (4).
5. Click OK to save your changes.
For more detailed mode setting, including the refresh rate, click Advanced Settings button, then the Adapter tab then on the List
all modes button. All valid combinations of resolution, colour quality and refresh rate are listed. For CRT monitors, it is best to
use a high refresh rate so as to avoid discomfort due to flicker. Flat panel monitors do not flicker and a low refresh rate is
adequate.
To set the display to Extend Mode using the DisplayLink menu
1. From the taskbar, click on the DisplayLink icon
2. Select Extend.
Setting the DisplayLink Display to Mirror the Primary Screen
Mirror mode copies what is on the main display and reproduces it on the secondary display.
To set the display into Mirror Mode
1. Uncheck the Extend the desktop onto this monitor checkbox (1 in Figure 1).
2. Click
Apply .
To open the Windows Display Properties on Windows
Select the display to be configured. Its mode, resolution, colour
quality and position can all be controlled from here.
PAGE
·
19
PAGE
·
20
Windows Vista/XP/2000 – Windows Display Properties
4. Using the USB Graphics Software