CipherLab RK25WO, Reference Manual

Page: 227 / 241

225
Appendix II
SYMBOLOGY SETTINGS (FOR SM2)
1D SYMBOLOGIES
Symbology Description Default
CODABAR
Codabar Enable
Codabar Switch to enable Codabar decoding. Enable
Length Option Set the length of the Codabar symbols to decode.

One Fixed length (Length 1)

Two Fixed lengths (Length 1>Length 2)

Max / Min Length (range: 0-55; Length 1<Length 2)

Any Length
Max / Min Length
(4-55)
CLSI Editing When applied, the CLSI editing strips the start/stop
characters and inserts a space after the first, fifth, and
tenth characters of a 14-character Codabar barcode.

The 14-character barcode length does not include start/stop
characters.
Disable
NOTIS Editing Set whether to include start/stop characters in the
transmitted data.

NOTIS Editing is to strip the start/stop characters, i.e. to
disable "Transmit Start/Stop Characters".
Disable
NOTIS Editing Type Options are None , ABCD/ABCD , abcd/abcd .
“NOTIS Editing” must be enabled.
None
Verify Check Digit Select whether to verify the Modulo 43 check digit. If the
check digit is incorrect, the barcode will not be accepted. None
Transmit Check Digit Decide whether to include the check digit in the data to
transmit.
“Verify Check Digit” must be enabled.
Enable
Security Level Setting options are Normal and High . High