CipherLab RK25WO, Reference Manual

Page: 220 / 241

218
RK25WO Mobile Computer
Symbology Description Default
Matrix 25 Enable
Matrix 25 Switch to enable Matrix 2 of 5 decoding. Enable
Length option Sets the length of the Matrix 2of 5 symbols to decode.

One Fixed length (Length 1)

Two Fixed lengths (Length 1>Length 2)

Max / Min Length (range: 0-55; Length 1<Length 2)

Any Length
Max / Min Length
(4-55)
Redundancy Enables or disable read redundancy for Matrix 2 of 5. Disable
Verify Check Digit Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted. Disable
Transmit Check Digit Decide whether to include the check digit in the data to
transmit. Disable
Composite
Composite CC-A/B
Disable
Composite CC-A/B Switch to enable Composite CC-A/B decoding. Disable
Composite CC-C
Enable
Composite CC-C Switch to enable Composite CC-C decoding. Enable
Composite TLC-39
Disable
Composite TLC-39 Switch to enable Composite TLC-39 decoding. Disable
Composite General Preference
UPC Composite Mode UPC barcodes can be “ linked ” with a 2D barcode during
transmission as if they were one barcode.

UPC Never Linked : Transmit UPC barcodes regardless of
whether a 2D barcode is detected.

UPC Always Linked : Transmit UPC barcodes and the 2D
portion. If the 2D portion is not detected, the UPC barcode
will not be transmitted.
Note: CC-A/B or CC-C must be enabled.

Auto-discriminate :
Transmit UPC barcodes as well as the 2D portion if present.
UPC always Linked
GS1-128 Emulation
Mode
Sets GS1-128 emulation mode for UCC/EAN Composite
Codes. Disable