FuzzyScan
Pr
og
ram
mi
ng Man
ua
l
Configure Your FuzzyScan
61
PROGRAM
Operation Control
(A Series)
Batch Reading
Unique Bar Code Reporting, Batch Reading
F_DEFAULT
Family Code Selection
P.C
Parameter Selection
Option Code
Batch Reading
SS
None
Batch Reading rule input ( 01-16 rules)
[FIN]
[Rules] [FIN]
Batch Reading
: When this function is enabled, you can scan multiple barcodes one by one continuously upon one trigger event. The scanner reports a good read beep and
indication only if all bar codes set by the “Batch Reading Rule” are read. Otherwise, the scanner reports an error beep and indication. The scanned data will be transmitted
according to the preset sequence which is defined in “Batch Reading Rule” regardless the scanned order of those barcodes.
- Batch Reading function is only available
Trigger Mode
.
-
Batch Reading is not available when
Multiple Read Mode
or
Center Alignment
is turned on.
-
Batch Reading Rule
:
-
To set the Batch Reading rule
1.
Scan the
PROGRAM
symbol.
2.
Scan the
Batch Reading
symbol (Family Code).
3.
Use the
Option Code
to define the preset Batch Reading rule.
4.
Scan the
FIN
symbol.
5.
Scan the
END
symbol to save your Batch Reading rule.
Note: Scan the
ABORT and
END
symbol to exit without saving any Batch Reading rule setting.
-
When you scan “None”, the preset Batch Reading Rule will be cancelled.
- Batch Reading Rule Syntax:
[n] [Element 1] FF [Element 2] FF [Element 3] FF …[Element n] FF
Where
n
is the number of elements in the overall rule. The number of elements is up to 16.
FF
indicates the end of one element.
- Element structure:
[Cino ID Hex value] [Code length] [Character match(es)]
Where:
[Cino ID Hex value]
Length: 2 byte
Please find Cino ID hex value from
Symbology ID Table
in appendix. Locate the Hex value for the symbology and scan the 2 digit hex values from the
Option
Code
.
Note: 99 is the universal number, indicating all symbologies.
