FuzzyScan
Pr
og
ram
mi
ng Man
ua
l
Configure Your FuzzyScan
6
Programming Procedures
As you scan the bar code command to select the desired
parameters, information about the final selected parameters
represented by the bar code commands are stored in the
FuzzyScan’s internal Flash Memory ASIC or memory. If you
turn off the unit, the Flash Memory ASIC or non-volatile
memory retains all programming options. You need not
re-program the FuzzyScan if you want to keep the existing
configurations in the next power on.
The programming procedures of FuzzyScan are designed
as simple as possible for ease of setting. Most
programming families take the
Single Scan
Selection
programming procedure. But several programming families
have more complex and flexible programmable options,
and you must take
Multiple Scans Selection, Cycling
Scan Selection or Dual Level Selection
to complete their
programming procedures. Each kind of programming
procedure is listed in the following pages for your reference.
Please give careful attention to become familiar with each
programming procedure.
If the programming family must take multiple scans
selection, cycling scan selection, or dual level selection
procedures, the family of the programming menu will be
marked with the matched representing symbol of
Programming Category
(P.C.) in bold font listed in the
following table. You can easily find the bold mark in the
programming menu, and refer to their flowcharts for details.
Before setting the FuzzyScan, please also refer to the
“Beeping Indications” listed in Appendix to understand the
details of programming beeping indications. It will be very
helpful for you to know the existing status while you are
programming the FuzzyScan.
Conventions of Programming Menu
Conventions
Descriptions
Factory Default Value
P.C.
Programming Category
SS
: Single scan selection
MS
: Multiple scans selection
CS
: Cycling scan selection
DS
: Dual level scan selection
( )
Necessary Option Code
[ ]
Selectable Option Code
