7
10
9
8
6
11
1
5
4
3
2
HDMI
INPUT2
INPUT1
MONITOR OUT
SCART IN
COMPUTER IN2
COMPUTER IN1
3/4
HS/CS
VS
OUT
4
VIDEO 2
1
8
(1) Network port
Used to connect the network cable.
(2) CONTROL
When using RS232 to control the projector,
please connect the serial control line to this
terminal.
(3) COMPUTER IN2/MONITOR OUT
- Used to connect the computer output.
- Used to output the analog signals from (4) or
(6) to the other monitor.
(4) COMPUTER IN1/SCART IN
- Used to connect a computer or RGB SCART
output.
(5) HDMI
Used to connect the HDMI digital output.
(6) BNC input jacks
Connect the component or composite video
output from video equipment to VIDEO 2
terminal, or connect the RGBHV format (5
line system) signal to G, B, R, Hs, and Vs
jacks.
(7) S-VIDEO
Used to connect the S-video output of video
equipment.
(8) Component (video) input jacks
Connect the component signals to these
terminals or connect the component video
signal to VIDEO1/Y terminal.
(9) AUDIO 3/4
Used to connect the audio output from vide
equipment (INPUT 3 or INPUT 4). When the
audio output is monaural, connect it to L
(MONO) jack.
(10) AUDIO 2
Connect
the
audio
output
from
video
equipment connected to (3) or (4) to this jack
(stereo).
(11) AUDIO OUT
Used to connect the audio output (stereo)
connected to (9) or (10).
Part names and functions
Rear terminal
Rear terminal