20
1
2
3
3
Basic operation
Turning off the projector
Press the ON/STAND-BY button on the side control or on
the remote control, and “Power off?” appears on the screen.
Press the ON/STAND-BY button again to turn off the
projector. The POWER indicator starts to flash red, and the
cooling fans keep running. (You can select the level of the
fans’ quietness and running speed.) At this time you can
unplug the AC power cord even if the fans are still running.
When the projector has cooled down enough to be turned on
again, the POWER indicator stops flashing.
“Power off” disappears after 4 seconds.
To maintain the lamp life, once you turn the
projector on, wait at least 5 minutes before turning if off.
Do not operate the projector continuously without
reset. Continuous use may result in shortening the lamp life.
Turn off the projector and let it stand for about an hour in
every 24 hours.
Note:
When the On start function is “On,” this projector is turned on automatically by connecting the AC power cord
to an AC outlet (p. 44).
The running speed of cooling fans is changed according to the temperature inside the projector.
Do not put the projector in a case be fore the projector is cooled enough.
If the WARNING indicator flashes or emits a red light, see “Warning Indicator”.
While the POWER indicator is flashing, the lamp is being cooled down and the projector cannot be turned on.
Wait until the POWER indicator turns red to turn on the projector again.
The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is
turned off.
The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be
shortened when the normal power-off processing for fan cooling is completed, comparing with the time the AC
power cord is immediately unplugged after the power-off.
Power off ?
