Cineversum Black Wind Four R599782 User Manual Download Page 18

Page: 18 / 48

5.0 CONNECTIONS

R599782 - Blackwing Four User Manual

4.4

Operating and Navigation Buttons

5.0 CONNECTIONS

This unit can be connected to any compatible devices using the available inputs listed below:

•

2x HDMI revision 1.3 with HDCP

•

1x Video

•

1x S-Video

•

1x Component (YPbPr / RGB / SCART)

•

1x 12 volt Trigger

•

1x RS-232

•

1x PC - VGA (sub D-15

The RS-232 terminal port can be used for automation.
For audio output, connect your audio video source to an ampliﬁer.

This unit features a 12 Volt trigger output that can be used to control external device in On/Off mode or together with
an optional anamorphic lens systems.

Button

Description

Hide display

To temporary hide the picture.

Input source

To switch input source.

Power button

To turn On or Off the projector.

Up - down - left - right

To navigate into On Screen Display (OSD) Menu.

OK (Enter)

To select or to conﬁrm action.

Back

To return to previous menu or cancel action.

Menu

To display On Screen Display (OSD) Menu.

INPUT

HIDE

BACK

Power button

Up - down

Input source

Back

Hide display

Left - right

Summary of Contents for Black Wind Four R599782

















































Search results

Summary of Contents for Black Wind Four R599782

Reviews:

Related manuals for Black Wind Four R599782

Brands by name

Popular brands

Cineversum Black Wind Four R599782, User Manual

Search results

Summary of Contents for Black Wind Four R599782

Reviews:

Related manuals for Black Wind Four R599782

Brands by name

Popular brands