GE AC Instalation and operation manual V10.docx
50
/ 63
In order to change the IP address four numbers have to be introduced. These numbers have to
be compressed between [0,255]. The first octet corresponds to the most significant part of the
address.
The procedure is equivalent to the procedure explained in Commands section. As a brief
summary the user has to introduce the first octet [0,255], he has to push the enter button, and
the first octet will replace the XXXX in the IPv4. Following the user has to introduce the second
octet, he has to push enter and the second octet will follow the first octet in the IP. The
procedure for the last two octets is the same. Finally when the last octet is already set the user
should press the send button in order to change the IP address.
Alarms
The Alarms window displays information about the power supply alarms. Any existing alarm will
appear in this window. In case the user is willing to reset the system, the RESET button permits
him to do so.
