Total Solution for Industrial Automation
2
CH 1. Introduction
1
Introduction
This manual will guide the reader through installation, functions, safety use and
operation of the PWM output module (CM3-SP32PWM) of the PLC-S. This manual
will need to be read and understood before attempting to install or use the device.
Store this manual in a noticeable place so that you can take it out and read it
whenever necessary. Contents of this manual is as below:
Chapter 1 discusses the overview of the manual and introduces important
features of the product.
Chapter 2 explains the general and performance specifications of the product.
Chapter 3 explains the types and features of the data memory stored in the
product.
Chapter 4 goes over the capacities of the product, and how to control the
system.
Chapter 5 guides the user through programming examples of the product.
Chapter 6 explains repair and maintenance methods, and how to operate the
device safely.
In order to run the device properly, the following specifications are required.
Product
Version
Software(CICON)
V6.20 or above is recommended
PLC-S CPU
V6.13 or above is recommended
Below is an instruction on how to check the latest version of the software and CPU.
Run the CICON and click the [Help] – [About CICON information] located in the
upper right side of a menu bar. You can check the version of software in the dialog
box.
[Figure 1] Route to check software version
