14
Installing the X2 Continued
Lifting the X2
1) Using a forklift approach the X2 from the non-column side end. Insert forks into the
lifting pockets being careful not to damage the air hose of valve.
WARNING!
The X2 is top heavy and has a center of gravity near the vertical
column. Use lifting pockets to assure safe loading and unloading of the X2.
WARNING!
The complex center of gravity makes hoisting the X2 difficult and
dangerous, serious injury or death may occur.
ONLY
people trained in making
such complex lifts, with the proper equipment may attempt hoisting the unit.
2) Place the unit onto the bed of the truck, in between the wheel wells and against the
cab end of the bed. If a flatbed is being used, the unit should be loaded from the
rear, moved to the front of the bed and centered between sides of the deck.
NOTICE
: The folded assembled length of the unit is
126” (10
ft 6 in) and
must
NEVER
be place sideways on a flatbed for transport.
Summary of Contents for 301-000-000
Page 34: ...34 Notes ...
Page 35: ...35 ...
Page 36: ...2601 Niagara Lane Plymouth MN 55447 763 557 1982 800 328 3874 Fax 763 557 1971 ...
