23
General Maintenance Continued...
Removal from Storage
1) Remove the cover and inspect your unit as described in
Initail Start up
section of this manual (see page 13)
2) Clean the unit and check for nests in the compressor, the air filters, engine
area, as well as the exhaust.
3) If fuel was drained out of the tank fill the unit with
FRESH
gas. Old un-
stabilized gasoline can cause hard starting and may damage the engine.
4) Move the unit outdoors and away from vents.
5) Start the engine and let it run until it is warm, and test the compressors air
flow.
NOTICE:
If your engine cylinders were fogged or oil coated prior to storage, the
smoky exhaust to begin with is normal.
Summary of Contents for 301-000-000
Page 34: ...34 Notes ...
Page 35: ...35 ...
Page 36: ...2601 Niagara Lane Plymouth MN 55447 763 557 1982 800 328 3874 Fax 763 557 1971 ...
