CIMCO 10 6300, Operating Instructions Manual

Page: 10 / 20

11 10 11
3 Description of appliance and
functional principle
3.7 Hole punching
1. The sheet metal hole
puncher to be used is to
be mounted in the
punching head..
4. Carry out punching while pressing the start switch.
The punching process has been correctly completed
once the sheet metal has been punched right through
without any residue.
Important:
The punching process
must then be stopped
immediately If it is
continued until automatic
switch-off, it can lead to
destruction of the hole
punchers.
2. After an appropriate hole has been pre-drilled, the
hole puncher plus the die and the tie bolt are
introduced into the hole and then locked finger-tight
with the punch
Emergency stop function
Pressing the release button
will retract the hole puncher
automatically..