Link 50 - 55
1-2009
50
01014
00632
2
1
10.5 - END OF TREATMENT - STORAGE
10.5.1 - Daily
•
The operator must:
a
. Wash the machine’s exterior before cleaning out the hydraulic circuit. The operative sequence will
permit the elimination of possible water residues from the fan casing and piping conveying the air
flow to the heads.
The washing of the sprayer’s exterior must be carried out in an area in which foul
waters are collected in a disposal pit. DO NOT UTILISE HIGH-PRESSURE HYDRO-
CLEANERS.
b
. Carry out the complete hydraulic circuit cleaning process, by washing the tank inside with a clean
water jet; then, he has to operate the sprayer, by spraying the tank contents on the ground, in
conformity with the antipollution directives in force in the country where the machine is employed:
if necessary, repeat the whole procedure.
c
. Check the efficiency of the distribution device (head) and the cleaning of the pulverising points
(diffusers), possibly replacing them if found to be damaged.
d.
Clean out the filter cartridge.
e
. Keep the machine in a ventilated place, sheltered from rain or sun: sunrays are the worst enemies
of plastic and rubber parts.
P15
L
ink
S
50
L
ink
S
50
basso
volume
basso
volume
100
200
300
400
500
600
700
800
LT
P15
*
00915
LAVAGGIO
CLEANING
NETTOYAGE
LIMPIEZA
H O
2
2-WAYS
x
3-WAYS
95086
®
a
c
P24
*
01015
