5. System description
Each CIK home Security system package usually contains:
•
1 Control Panel
Control panel is the control unit which is usually installed inside at the door close to the
entrance of your home. To install the control panel, extra power cable installation may be
required with an additional charge of
$
200 if no alarm system has been installed before.
•
2 PIR Motion Detectors
PIR is used to detect the motion inside the house to cover a wide area up to 15-20 meters away.
PIRs include batteries which should be replaced every 2 years.
•
3 Door Breakers
Door breaker sensors are installed either at the doors or at the windows. It has two parts, one is
installed at the fixed part and the other is installed at the moving part, when a door or window
is opened, the sensor will emit an alarm signal. Door breakers have batteries inside and should
be replaced every 2 years.
•
1 Remote
The remote is intended for you to turn on or turn off the alarm outside your home.
** Warning if you are storing the remote in your pocket, avoid pushing or squeezing the
remote, otherwise it may trigger an alarm or send unexpected alarm signals unexpected.
•
1 Water Leaking Sensor (Add-on option)
•
1 Gas Detector
(Add-on option)
•
1 Smoke Detector
(Add-on option)
01. Control Panel
1pc
02. PIR Motion Detector
2pc
03. Door Breaker
3pc
04. Remote
1pc
01
02
03
04
4
•
1
Siren
(Add-on option)
