CiDRA AIRtrac, Installation, Operation & Support Manual

Page: 11 / 52

21798-01-EN Rev 02 Page 9
2
EQUIPMENT SAFETY COMPLIANCE
Safety
This equipment is listed with TÜV Rheinland of North America, Inc., a
nationally recognized testing laboratory, certified for ordinary location
use per the following US, Canadian and European standards:
UL/ 61010-1, CSA C22.2 No. 1010 and EN61010-1.
North American Emissions
This equipment is compliant with Class A limits for radiated and
conducted radio noise emissions, as defined in Subpart A of Part 15 of
the FCC rules, as well as the requirements defined in ICES-003 for
Canada.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-
003 du Canada.
Radio Module (Hatch-Mounted Sensor, Receiver Module
and Telematics Module)
The radio module in the sensor and receiver module are labeled with
its own FCC ID and IC Certification Number. The FCC ID and IC
certification numbers are not visible so a label referring to the
enclosed module is provided. The final end product must be labeled in
a visible area with the following,
“Unit Labeling”, see below.
Any changes or modifications not expressly approved by CiDRA could
void the user’s authority to operate the equipment.
2.3.1 Unit Labeling: Sensor and Receiver Module
FCC ID: MCQ-S2CTH
IC 1848A-S2CTH
This device complies with Section 15.19(a) of the FCC Rules, and
ICES-003. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.