CiDRA AIRtrac, Installation, Operation & Support Manual

Page: 19 / 52

21798-01-EN Rev 02 Page 17
4
INSTALLATION
Installation Training
Satisfactory completion of an installation training program provided by
CiDRA is required prior to installing the AIRtrac Mobile system.
Following purchase of AIRtrac Mobile services, the installation training
program will generally work as follows:
•
Customer designates installation personal and schedules initial
installation
•
CiDRA provides on-site installation assistance and training
during the initial installation
•
The designated installation personal will receive a certificate of
training completion and approval for installation of follow-on
AIRtrac Mobile systems
Contact CiDRA Customer Support for more information (Section 1.4).
Preparation
In addition to the warnings and cautions in this section, refer also to
the General Safety Guidelines in Section 3.
4.2.1 Power Requirements
Ensure truck electrical power is turned off and truck battery
disconnected prior to working on the receiver, display and telematics.
DC input power requires the following:
Receiver Module:
9 to 16VDC, 1 Watt, (for Trucks with 12VDC Battery only)
In-Cab Display:
9 to 16VDC, 1 Watt
Telematics Module:
9 to 16VDC, 7 Watts
An overcurrent protection device (fuse) must be installed on the
supply side of the +12V ignition and +12V battery power inputs, with a
fuse current rating of 10A to 20A.
Warning
12VDC Vehicle only