|
13
Chapter 3 – settInGs & fIrst start
3.8 PC-Connection
To analyze the data recorded by the CM 9.3 A (+) you require the program “
CicloAgent pro
” which can be
downloaded from our website “
www.CicloSport.com/cm93a
”. Download the file and start the installa-
tion process.
Once you have installed the software, plug the USb dongle into a free USb port on your PC or Mac. Take the
CM 9.3 A (+) and press the middle button until the menu appears. Press the left or right button until the
menu item PC-LINk is displayed. Press the middle button and the display reeds LINk. To start the transfer
process, press the left and right buttons simultaneously. The CM 9.3 A (+) is now looking for the USb dongle.
When connected, “
Linked PC
” will be displayed
The CicloAgent pro will guide you through the download process.
3.9 Others / SET MISC
3.9.1 Power-saving mode.
It is recommended to put the CM 9.3 A in power saving mode to conserve battery life.
If you want to put the computer into the power saving mode, press the left or right button in the main menu
until the lower display shows
SET MISC
is displayed, press the center button.
Power down is activated by pressing the left and the right button simultaneously. Pressing the left button
brings you to
3.9.2
The CM 9.3A (+) automatically enters a low power mode after approximately 6 minutes with-
out signals received or buttons pressed.
3.9.2 Reset all values
Pressing the left button in the Power down menu brings you to the totals reset. Press the middle button to
reset all daily and all total values.
If you want to delete only the daily values without starting a recording, press all three keys simultaneously
for 5 seconds.
3.9.3 Recording interval
You can change the recording interval with the right button:
Intervall
Max. recording time
1 Seconds
2 Hours
5 Seconds
10 Hours
10 Seconds
20 Hours
30 Seconds
60 Hours
60 Seconds
120 Hours
The CM9.3 A will overwrite older data if the memory is full without notice. When the current recording has
overwritten all older files and filled the entire memory of the CM 9.3a, the recording will be stopped and
“
MEM F
” will be displayed
