Lower the Keypanel
Screw the Cabinet to the Bracket
Check Connections
Reader
10mm Open Ended Ring Wrench/Spanner
Ratchet Driver with 10mm socket
Find the latch in the top of the right side of the cabinet.
Gently push it away from you to release the key panel.
Make sure the main door is open and lower the key panel.
Secure the cabinet to the bracket using the screws
and washers provided.
Access is limited around the top left screw so you
will need to use the opended spanner/wrench.
With the keypanel lowered, check that all of the boards are
seated correctly and the cables are firmly connected.
When complete, raise the keypanel until it locks in place.
The cabinet is capable of
accepting the input from a
reader using OSDP or Wiegand.
If you are installing a reader, skip
to supplementary instructions on
page 10.
TORUS
Installation Guide
7
