CIAT MAJOR LINE, Instruction Manual

Page: 31 / 128

EN
EN-5
N 09.60 F
0DMRU/LQH
Motor
Reference
102/104 202/204 302/304 402/404 502/504 602/604
Input power
(W)
V5 33 58 88 106 108 135
V4 31 41 67 93 94 114
V3 29 36 52 80 79 99
V2 27 31 42 72 72 88
V1 26 27 35 63 63 77
Input current
(A)
V5 0.14 0.25 0.38 0.46 47 0.59
V4 0.13 0.18 0.29 0.40 0.41 0.50
V3 0.13 0.16 0.23 0.35 0.34 0.43
V2 0.12 0.13 0.18 0.31 0.31 0.38
V1 0.11 0.12 0.15 0.27 0.27 0.33
)LOOLQJ
Drain the coils during commissioning.
2SHUDWLQJUHFRPPHQGDWLRQ
To prevent any inopportune opening of the thermo-actuators, the temperature of the
air surrounding the thermo-actuators should be kept at no higher than 50°C. This
ULVNPXVWEHWDNHQLQWRDFFRXQWHVSHFLDOO\IRUXQLWVLQDFRQ¿QHGVSDFH HJ
units
LQVWDOOHGLQDVXVSHQGHGFHLOLQJ
&,$7VKDOOQRWEHOLDEOHIRUGDPDJHWRYDOYHVFDXVHGE\IDXOW\GHVLJQRIWKH
K\GUDXOLFVXSSO\QHWZRUNRULQFRUUHFWFRPPLVVLRQLQJ
To protect against the risk of condensation when using chilled water, lagging should be
placed along the entire lengths of pipes and completely sealed at its ends. When using
the water coil and electric heater, we advise against using cross-linked polyethylene
3(;SLSHVWRVXSSO\ZDWHUWRWKHXQLW7KLVLVEHFDXVHRYHUKHDWLQJRIWKHHOHFWULF
KHDWHUFRXOGFDXVHWKHZDWHUWHPSHUDWXUHWRULVHEULHÀ\7KLVFRXOGFDXVHWKHUDSLG
deterioration of the PEX pipe near the unit and cause it to burst. We recommend using
VWDLQOHVVVWHHOEUDLGHGRUHTXLYDOHQWKRVHVIRUK\GUDXOLFFRQQHFWLRQV
(/(&75,&$/&211(&7,216
z Ensure that the electrical supply is disconnected before working on the unit.
z Only personnel qualified to perform electrical work may carry out installation
and maintenance work.
As indicated on the data plate, the unit must be connected to a single-phase 230V
SRZH]+]
!
The unit must be earthed. CIAT shall not be liable for incidents resulting from faulty
RUQRQH[LVWHQWHDUWKLQJ$OZD\VIROORZWKHFLUFXLWGLDJUDPGHOLYHUHGZLWKXQLW