EN
EN - 9
Changeover thermostat for mixed coil:
The customer is responsible for installation on the hydraulic system. The changeover thermostat
installed on the pipe must be integrated into the insulation of the hydraulic pipe.
Technical characteristics
Min. WINTER temp.: 28 °C
Min. SUMMER temp.: 18 °C
Breaking capacity: 5(3) A.
Cable length: 2500 mm
Damper
The damper is not protected against the weather if the canopy option has not been selected.
4. INSTALLATION & CONNECTIONS
The installation of the equipment must comply with the regulations and standards of the recipient country.
Ensure all electrical components are earthed.
The equipment must not be accessible to the public.
Special recommendations:
• Connections must not place mechanical stresses on the unit.
• Keep all inspection doors closed while the unit is operating
• It must not be possible to access the fans via the connection frames for the unit. If there is a direct air intake, a grille must be
fitted, as a minimum.
• If fitted outdoors, the units must be installed so as to withstand the climate conditions in the installation location (risk of snow:
height from ground/risk of wind: suitable mountings, gooseneck type electric connection to the unit, etc.).
Flexible sleeve
INSTALLATION OUTDOORS
The installation of a dual-flow unit outdoors requires a roof and a canopy to be fitted; these are usually supplied mounted* and
adapted to suit each configuration.
(* supplied in kit form if delivery of the elements assembled is not possible)
Fitting the roofs
The roofs for units are designed to provide sufficient protection against adverse weather conditions, as they overlap the edge of
the unit by 80 mm.
BLACK wire (winter)
IVORY wire (shared)
BLUE wire (do not use)
