9
English
,(,9)
To show temperature, humidity, Touch’N’Go settings and
%}
1. Open the lid
2. Press the zone button ( ) to select the desired
~ |}
0. NUI zone
1. Heating / cooling zone 1
2. Heating / cooling zone 2
3. Domestic water
,(:))6+
1.
Press and hold the comfort button
(
or
or
) to be changed for
along with the symbol heat (
) or cool
(
2.
Select the desired zone by pressing the
zone (
) button repeatedly.
3.
If zone 1 or 2 is selected, press the mode
(M) button to switch between heat (
)
and cool (
).
4.
Press the up or down button on the right
side of the display until you reach the
desired temperature setting for the current
mode of operation. At this moment the
triangle icon ( ) above the pressed
comfort button (
) will start
5.
Press the up or down button on the right
side of the display until you reach the
desired temperature setting
6.
Pressing one of the other two Touch ‘N’ Go
button, item 4 to 5 can be repeated
7.
!
repeat steps 3 to 6.
8.
"#$
exit from the Comfort change mode
,(;$))*7*7
After you have set temperature settings for home, away
and sleep, you can program the time of day you want to
use for those temperature settings.
Time ranges are called periods; zone 1 and zone 2 have
maximum 6 periods; zone 3 has maximum 4 periods.
; ,%>;(Y;*Y;Y;Y;
and P6.
The thermostat has preset periods (see below), but you can
,,> >
To select the number of periods, refer to the (user)
parameters table in the unit documentation.
-
-*
Zone 1 / Zone 2
Zone 3
P1
6:00
6:00
P2
8:00
8:00
P3
12:00
18:00
P4
14:00
24:00
P5
18:00
Not available
P6
22:00
Not available
NOTE:
Zone 1 and zone 2 have the same time periods.
,(@*7
It is possible to assign the following parameters to each
time period.
~(}!!% {
/
/
), Zone mode
(ON/OFF), Silent mode (ON/OFF)
~*}!!% {
/
/
), Zone mode
(ON/OFF)
~}!,| !%
(
/
), booster heater (ON/OFF)
Here is an example of a programming using the factory-set
periods and Touch ‘N’ Go options.