Installation
Activated Carbon Filter Installation
（
VENT INSIDE
）
:
If you do not have an outlet to the outside, exhaust pipe is not required and
the installation is similar to the one shown in section
“Installation (Vent
outside)”
1.
Activated carbon filter can be used to trap odors.
In order to install the activated carbon filter, the grease filter should be
detached first. Press the lock and pull it downward.
2.
Plug the activated carbon filter into the unit and turn it in clockwise
direction. Repeat the same on the other side.
3.
Install the grease filter.
If the activated carbon needs to be replaced,
please turn it in anti-clockwise direction.
NOTE:
➢
Make sure the filter is securely locked. Otherwise, it would loosen and
cause dangerous.
➢
When the activated carbon is installed, the suction of the cooker hood will
be reduced.
13
