11
Applying Treatment (Body)
Apply the head of the main unit to your skin and move the head smoothly
(See the figure below).
Note: Don’t apply the head of the main unit on the areas of your skin
indicated by in the figure and any bony part of your body.
<Calf to thigh>
<Buttocks>
<Waist and belly>
<Upper arm>
1
2
3
4
6
5
Press and hold the power button, and a brief beep is heard, and the EP
button will light up in blue. Then, press the CLEANSING button to start
ionic cleansing.
The operation automatically stops in approx. 10 minutes in the CLEANSING
mode and the power is turned off. Press and hold the power button again
to start the EP mode. (See the figure in the right.)
Note: When you apply the appliance on your face for the first time, Low level
(indicated by lighting of blue lamp) is recommended for the EP mode.
Apply plenty of gel * on the skin area where the appliance is applied.
* Aqua-Collagen-Gel Enrich-Lift-EX or other recommended skincare products
When you want to finish before the course is completed, press and hold
the power button. When the power is turned off, a beep is heard.
The operation automatically stops in approx. 10 minutes in the EP
mode and the power is turned off.
EP
After treatment
ipe off remaining gel with a wet towel
o clean the appliance remove gel on any part of the main unit with a facial tissue
or a tightly wrung-out moistened towel.
o not wash the main unit with water which may cause malfunction
ever use detergent or solvent such as thinner when wiping the main unit
