![Chungho WHI CAFFE CHP-5230S User Manual Download Page 21](http://html1.mh-extra.com/html/chungho/whi-caffe-chp-5230s/whi-caffe-chp-5230s_user-manual_2606397021.webp)
19
① This is performed with the power cord plugged in.
② Hold the lower front panel as pressing down and pull it frontward.
Put the drain switch on located on the upper side and turn the both
sides of drain valve open to drain cold, ambient and hot water.
※When drain switch is set, water dispensing and ice dispensing are only available.
③ Remove the water after detaching water tray.
④ Remove ice by pressing "ICE" (Ice dispensing touch button)
※ If there is no other option but to transport the unit in an inclined position, convey
the unit on the back.
※ When moving the product in an inclined position with water not completely drained,
the water inside the tank may come out while moving the product.
This may damage the product.
█
Ice dispensing mode
If "ICE"(ice dispenser) touch button is pressed, the door of the ice storage is opened
and ice is served from the dispensing hole.
※If "LOCK" function (Ice and hot water dispensing) is set, ice dispensing and Hot water selection touch
button does not work. Use it after releasing the lock function.
█
Warm water dispensing mode
If "WARM"(warm water selection) touch button is selected and the water dispensing
button is pressed, warm water is served.
※Warm water temperature is normally 104℉~122℉(40℃~50℃).
※Warm water is served while "HOT" is on. If not, ambient water is served.
█
Hot water dispensing mode
If "HOT"(hot water selection) touch button is selected and the water dispensing
button is pressed, hot water is served.
※If "LOCK" function (Ice and hot water dispensing lock) is set, hot water is not served. Use it after
releasing the lock function.
※If hot water operation LED is turned off, hot water is not served as the heater does not work.
█
Cold water dispensing mode
If "COLD"(cold water selection) touch button is selected and water dispensing button
is pressed, cold water is served.
※Cold water is the most frequented water temperature. "COLD" water is being set automatically.
█
Ambient water dispensing mode
If "AMBI"(ambient water selection) touch button is selected and water dispensing
button is pressed, ambient water is served.
※If hot water or ambient water is selected and it is not used for a given time, the system will auto
matically switch into cold water dispensing mode. (Default function)
※There is not separate setting and releasing method for the use of ambient water and cold water.
They operate automatically as designated by the program when the power is supplied.
When taking hot water, be careful of burns and use containers such as a cup.
Ice and water dispensing method
Draining method for relocation/installation
Drain
Switch
Cold water drain
Hot/Ambi water drain
Usage
커피얼음정수기_메뉴얼_영문2_T_461_메뉴얼_5170S 14. 9. 22. 오전 10:22 페이지 21