●
Keep tubes fixed properly so as not to splash
around area with water from brine tube.
●
When taking ice, avoid using a
glass cup and avoid taking ice
with cup filled with beverage,
coffee etc.
(A glass cup can be broken by
abrupt temperature change or
the ice strike. Beverage and
coffee can splash into ice dis-
pensing hole, it can cause mold.)
●
When taking ice, place a container
close to the ice dispensing hole
not to drop ice on the floor.
(Be careful in order not to allow
containers such as cups, etc. to
be inserted into the inside of
ice dispensing hole.)
●
Do not put foreign materials
into the ice dispensing hole
or block the dispensing hole.
(This can cause a malfunction.)
●
After transporting the
unit, do not supply
the power for at least
30 minutes to stabilize
the unit.
●
Do not operate the unit
on sloping surface.
(This can cause a malfunction
and trouble.)
●
Do not tilt the unit over
45° during transportation.
(Severe inclination can cause
a performance degradation.)
●
Do not install the unit in a
sloped or unstable position.
(This can cause a performance
degradation, system damage
or overall trouble.)
●
Do not install the unit in a
place where the tempera-
ture may drop below 32 ° F
(0 °C).
Associated with the possibility of injury, property damage and performance degradation.
Caution
07
●
To avoid burns from hot
water, use containers such
as a cup during hot water
dispensing.
●
Do not put any covering on
the rear and side of the unit.
(Blocking ventilation holes
may raise inside tempera-
tures and cause system
malfunction or even system
stoppage.)
Summary of Contents for CHP-5321D
Page 28: ...27 15 MEMO...