3
How to Open the Safe for the first time
1.
Press “ON” – the buzzer signals once and the green LED light flashes
2.
Enter the primary code upon delivery the default primary code is 1-2-3-4-5-6)
3.
Press “ENTER”.
4.
Both the buzzer sounds and the green LED flashes twice
5.
Turn the handle to the right (clockwise) to retract the door bolts within the 7
seconds that the green LED is illuminated.
How to Close the Safe
The lock closes automatically 7 seconds after the code is inputted and the “ENTER”
button is pressed. So if the door bolts are still retracted:
1.
Turn the handle to the left (anti-clockwise) to extend the door bolts
2.
The safe is now locked.
Programming Codes
1.
Programming the Primary Code
Press “ON”
Press “ENTER”
Press “1”
Press “ENTER”
Input the valid primary code (1-2-3-4-5-6 initially) and press “ENTER”
Enter the new primary code (from 6 to 8 figures) and press “ENTER”
Re-enter the new primary code and press “ENTER”
The correct entry of a valid or new primary code is indicated by two buzzer sounds
and two green LED signals. An incorrect entry of a valid or new primary code (less
than 6 figures or an incorrect re-entry) is indicated by a long buzzer signal and the
red LED. A mistake in the procedure sequence is indicated by a long buzzer and red
LED. In these cases you have to restart the procedure by pressing “ENTER”
N.B. THE PRIMARY CODE MUST BE CHANGED BEFORE ATTEMPTING
TO SET UP THE USER CODE
