Installation
1. The triple technology detector should be installed in entry or exit
which intruder can easily enter.
2. The detector is more sensitive to cross-movement than to direct
movement. The performance of detector is optional when detection
direction is across the walking direction of intruders.
3. Fix the bracket of detector in the wall, open the front cover and
take out the PCB, attach the back cover to the bracket with screws.
4. Fix the PCB in the back cover and then cover the case.
5. Keep LED indicator at the right direction. The fixing height is about
2~2.2 from the ground.
6. Adjust installation height or bracket to change the detection
distance and angle.
Testing and Usage
1. With 12V prower supply, the detector is in self-testing state and
red LED flashes; The LED goes off after 60 seconds and the detector
is in working state.
2. Walk across detection area and watch the LED indicator to make
sure the red LED light up when detecting the movement.
Notice
1. Avoid mounting the detector close to places where heat changes
fast or air stream flows frequently. (ie. Air conditioner, tube light,
oven, waver, refrigerator etc.)
2. Avoid it facing to window which can be easily interfered by
complicated environment. (ie. sunlight, crowds, or flowing cars etc.)
3. The product can reduce the possibility of accident, but the user is
advised to take all necessary precautions for the safety and the
protection of the property.
Detection Area
Side view
2.2m
0.5m
3m 5m 7m 12m
Top view
0m 2m 4m 6m 8m 10m 12m
6m
4m
2m
0m
2m
4m
6m
Printed in China
2013 V 1.0
