Chrysler SRT Viper Owner'S Manual Download Page 322

Page: 322 / 372

Backup Lamps

1. Reach behind the rear bumper and press the release

tabs on the backup lamp housing.

2. Separate the backup lamp housing from the rear

bumper fascia.

3. Disconnect the electrical harness connector.

4. Turn the bulb and socket assembly counterclockwise,

and then pull it out of the backup lamp assembly.

5. Remove the bulb from the connector socket and install

the replacement bulb.

6. Reinstall the bulb and socket assembly into the backup

lamp assembly, and then turn it clockwise.

7. Reinstall the backup lamp housing into the rear bum-

per fascia.

320

MAINTAINING YOUR VEHICLE

Summary of Contents for SRT Viper





















































































































































































































































































































































































Search results

Summary of Contents for SRT Viper

Reviews:

Chrysler SRT Viper, Owner'S Manual, Page: 322 / 372

Search results

Summary of Contents for SRT Viper

Reviews: