Chrysler SRT Viper Owner'S Manual Download Page 135

Page: 135 / 372

Turning ParkView

姞

On Or Off — With Touch

Screen Radio

1. Turn the Radio on.

2. Press the “More” soft-key.

3. Press the “Settings” soft-key.

4. Press the “Safety & Driving Assistance” soft-key.

5. Press the check box soft key next to “Parkview

威

Backup Camera” to enable/disable.

GARAGE DOOR OPENER — IF EQUIPPED

HomeLink

威

replaces up to three hand-held transmitters

that operate devices such as garage door openers, motor-
ized gates, lighting or home security systems. The
HomeLink

威

unit is powered by your vehicles 12 Volt

battery.

The HomeLink

威

buttons, located on the sunvisor, desig-

nate the three different HomeLink

威

channels. The

HomeLink

威

indicator is located above the center button.

NOTE:

HomeLink

威

is disabled when the Vehicle Secu-

rity Alarm is active.

HomeLink

威

Buttons Sunvisor

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

133

Summary of Contents for SRT Viper





















































































































































































































































































































































































Search results

Summary of Contents for SRT Viper

Reviews:

Chrysler SRT Viper, Owner'S Manual, Page: 135 / 372

Search results

Summary of Contents for SRT Viper

Reviews: