Home
/
Chrysler
/
SRT Viper
/
Owner'S Manual

Chrysler SRT Viper, Owner'S Manual, Page: 198 / 372

Share

Page: 198 / 372

Chrysler SRT Viper Owner'S Manual Download Page 198

3. When the system is set up for your comfort level, it is

not necessary to change the settings. You will experi-
ence the greatest efficiency by simply allowing the
system to function automatically.

NOTE:

•

It is not necessary to move the temperature settings for
cold or hot vehicles. The system automatically adjusts
the temperature, mode, and blower speed to provide
comfort as quickly as possible.

•

The temperature can be displayed in U.S. or Metric
units by selecting the US/M customer-programmable
feature. Refer to the “Uconnect™ Access System Set-
tings” in this section of the manual.

To provide you with maximum comfort in the Automatic
mode, during cold start-ups the blower fan will remain
on low until the engine warms up. The blower will
increase in speed and transition into Auto mode.

Recirculation Control

When outside air contains smoke, odors, or high humid-
ity, or if rapid cooling is desired, you may wish to
recirculate interior air by pressing the RECIRCULATION
control button. Recirculation mode should only be used
temporarily. The recirculation LED will illuminate on the
blower control knob when this button is selected. Push
the button a second time to turn off the Recirculation
mode LED and allow outside air into the vehicle.

NOTE:

In cold weather, use of Recirculation mode may

lead to excessive window fogging. The Recirculation
mode is not allowed in Defrost mode to improve window
clearing operation. Recirculation will be disabled auto-
matically if these modes are selected.

Summer Operation

The engine cooling system in air conditioned vehicles
must be protected with a high-quality antifreeze coolant
to provide proper corrosion protection and to protect

196

UNDERSTANDING YOUR INSTRUMENT PANEL

«
...
196
197
198
199
200
...
»

Summary of Contents for SRT Viper





















































































































































































































































































































































































Reviews:

No comments