Chrysler Sebring Coupe Owner'S Manual Download Page 66 | Manualshive

Page: 66 / 394

Chrysler Sebring Coupe Owner'S Manual Download Page 66

REAR SEATS
Rear seat capacity

WARNING!

•

The rear seating capacity of this vehicle is three
people.

•

The rear seat occupants should always wear their
seat belts when the vehicle is in motion.

Fold down rear seatbacks

The rear seatbacks can be folded forward to provide
additional cargo area.
Pull the left and/or right release knobs, and fold the rear
seatbacks forward.

HEAD RESTRAINTS

Padded head restraints for the front seats reduce the risk
of whiplash injury in the event of a rear impact.

G02C0750

G26A0140T

Lock knob

66

SEATS, SEAT BELTS, CHILD RESTRAINTS AND AIR BAGS

«
...
64
65
66
67
68
...
»

Summary of Contents for Sebring Coupe











































































































































































































































































































































































































Reviews:

No comments