Chrysler PACIFICA HYBRID 2019 User Manual Download Page 78

Page: 78 / 244

With KeySense in use there will be multiple associated messages shown in the following table:

Setting

Instrument Cluster Display Message

None – With vehicle ignition ON

“KeySense in use. Max vehicle speed set to xx MPH/or km/h”

Max Vehicle Speed

•

“Max speed reached. KeySense in use” supported by a chime

•

“Approaching max speed xx MPH/km” supported by a chime

Start Up Fuel Alert message

“Range to empty xxx miles or km”

Early Low Fuel Alert Message

“Fuel Low”

ParkSense

“Feature cannot be disabled. KeySense in use”

Blind Spot

“Feature cannot be disabled. KeySense in use”

Forward Collision Warning

“Feature cannot be disabled. KeySense in use”

Instrument Cluster Display Menu
Items

NOTE:

The Instrument Cluster Display menu items display
in the center of the instrument cluster. Menu items
may vary depending on your vehicle features.

Refer to “Instrument Cluster Display” in “Getting
To Know Your Instrument Panel” in the Owner’s
Manual for further information.

Instrument Cluster Display
Programmable Features Screen Setup

Push the

down

arrow button to scroll through

the Menu Items until the Screen Setup displays in
the instrument cluster display. Push the

button

to enter Screen Setup. The Screen Setup feature
allows you to change what information is displayed
in the instrument cluster display as well as the loca-
tion that information is displayed.

Configurable Screen Setup Menu Titles

• Compass

• Trip A Distance

• Outside Temp

• Trip B Distance

• Time

• Audio Info

• Range to Empty

• Menu Title

• Average MPG

• Speedometer (Digital

Speed) select be-
tween MPH/km

• Current MPG

• Defaults (Restore/

Cancel)

• Odometer

Refer to “Instrument Cluster Display” in “Getting
To Know Your Instrument Panel” in the Owner’s
Manual for further information.

GETTING

KNO

OUR

INSTRUMENT

PANEL

Summary of Contents for PACIFICA HYBRID 2019





















































































































































































































































Search results

Summary of Contents for PACIFICA HYBRID 2019

Reviews:

Chrysler PACIFICA HYBRID 2019, User Manual, Page: 78 / 244

Search results

Summary of Contents for PACIFICA HYBRID 2019

Reviews: