Chrysler PACIFICA HYBRID 2019 User Manual Download Page 59 | Manualshive

Page: 59 / 244

Chrysler PACIFICA HYBRID 2019 User Manual Download Page 59

Icon

Description

Rear Mode Control

Push this button on the Rear Climate Hard Controls to change the air distribution mode for the rear passengers to one of the following:

Panel Mode

Panel Mode

Air comes from the outlets in the headliner. Each of these outlets can be individually adjusted to direct the flow of air. Moving the air vanes of
the outlets to one side will shut off the airflow.

Bi-Level Mode

Bi-Level Mode

Air comes from both the headliner outlets and the floor outlets.

NOTE:

In many temperature positions, the Bi-Level mode is designed to provide cooler air out of the headliner outlets and warmer air from the floor
outlets.

Floor Mode

Floor Mode

Air comes from the floor outlets.

Rear Temperature Control

•

Rear Passenger Temperature Up Button

To change the temperature in the rear of the vehicle, push temperature control up button to raise

the temperature. The rear temperature settings are displayed in control head.

•

Rear Passenger Temperature Down Button

To change the temperature in the rear of the vehicle, push temperature control down button

to lower the temperature. The rear temperature settings are displayed in control head.

57

«
...
57
58
59
60
61
...
»

Summary of Contents for PACIFICA HYBRID 2019





















































































































































































































































Reviews:

No comments