Chrysler 300M 1999, Manual, Page: 745 / 766

TEST VER 2A
VERIFICATION TEST - BODY
1. Reconnect all previously disconnected components and connectors.
2. Was the body control module replaced?
NO − Continue to step 3.
YES - Use the DRB and:
1. Program all RKE transmitters used with this vehicle.
2. Recalibrate HVAC doors.
3. Program other options as necessary.
3. If any repairs were made to the HVAC system or the battery was disconnected:
Start the engine and, using the DRB, recalibrate the HVAC doors.
4. Ensure that the ignition is on, and with the DRB, erase all diagnostic trouble codes.
5. Turn ignition off and wait 5 seconds.
6. Turn ignition on and fully operate the system that was malfunctioning.
− If the system is operating properly, continue to step 7.
− If the system is not operating properly, repeat ‘‘Symptom ID’’ TEST 1A.
7. With the DRB, read body control module trouble codes.
− If no codes are present and the customer’s complaint cannot be duplicated, the repair is
complete.
− If any codes are present, perform ‘‘Symptom ID’’ TEST 1B.
V
E
R
I
F
I
C
A
T
I
O
N
T
E
S
T
735