Chrysler 300M 1999, Manual, Page: 16 / 766

Climate Control (Automatic and Manual) system support
Door ajar switch status
Door Lock Inhibit (key in ignition or headlamps/park lamps on)
Electronic Odometer Support
Fog Lamp Control
Headlamp multiplexing control
Headlamp, Park & tail lamps with battery save feature
Headlamp Time Delay
Illuminated Entry with
9
fade to off
9
Interior lighting with battery save feature
Mechanical Instrument Cluster (fuel level, dim data, odometer & warning chime) support
Memory system
Overhead travel information system
Power door lock multiplexing control
Rear Window Defogger Control
Remote Keyless Entry with Panic Mode
Remote power decklid release
Rolling door lock control (customer programmable)
Sentry key immobilizer
Vehicle Theft Security System
Wiper Control (speed sensitive with return to park)
The BCM receives information over the PCI Bus from the PCM in order to support certain
features. The required information is as follows:
•
Engine RPM
• Engine Temperature
•
Injector on Time and Distance Pulses
• Vehicle Speed
•
Charging System Failure, Engine Temperature Limp-In, VTSS Arming Status
• Engine Model
•
9
Check Engine
9
lamp status
The BCM provides the PCM with information on the A/C switch status, battery temperature which
is determined by the ambient temperature sensor and the
9
OK to Start
9
or VTSS status.
The 1999 300M has several customer programmable features which can be disabled or enabled
by the customer.
FEATURE DEFAULT PROGRAMMING METHOD FEEDBACK
Rolling
Door
Locks Enabled Close all doors BCM provides a sin-
gle chime to indicate
completion of the pro-
gramming
Place vehicle key in the ignition and
cycle between off and run four times
ending in the off position
Customer depresses the driver power
door lock switch to lock the doors
Body Controller will toggle the enable/
disable state of rolling locks
RKE —
Horn Chirp Enabled Continually press the lock button for a
minimum of 4 seconds to a maximum
of 10 seconds None
G
E
N
E
R
A
L
I
N
F
O
R
M
A
T
I
O
N
6