Chrysler 300 SRT8 2012 Owner'S Manual Download Page 59 | Manualshive

Page: 59 / 557

background image

In addition, the vehicle is equipped with a Supplemental
Driver Side Knee Air Bag mounted in the instrument
panel below the steering column.

NOTE:

The Driver and Front Passenger Advanced Front

Air Bags are certified to the new Federal regulations for
Advanced Air Bags.

The Advanced Front Air Bags have a multistage inflator
design. This allows the air bag to have different rates of
inflation based on several factors, including the severity
and type of collision.

This vehicle may be equipped with driver and/or front
passenger seat track position sensors that may adjust the
inflation rate of the Advanced Front Air Bags based upon
seat position.

This vehicle may be equipped with a driver and/or front
passenger seat belt buckle switch that detects whether
the driver or front passenger seat belt is fastened. The
seat belt buckle switch may adjust the inflation rate of the
Advanced Front Air Bags.

Advanced Front Air Bag And Knee Bolster Locations

1 — Driver And Passenger

Advanced Front Air Bags

2 — Knee Bolster

3 — Supplemental Driver Side

Knee Air Bag

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

57

«
...
57
58
59
60
61
...
»

Summary of Contents for 300 SRT8 2012














































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 SRT8 2012

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 2

Brand: Cadillac Pages: 494

Brand: Cadillac Pages: 500

Brand: Cadillac Pages: 40

Brand: Cadillac Pages: 432

Brand: Cadillac Pages: 338

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 438

Brand: Subaru Pages: 3

Sterling ALL-TERRAIN 576

Brand: Roadmaster Pages: 12

Brand: Tessera4x4 Pages: 20

Brand: Waeco Pages: 172

Brand: VBG Pages: 16

Brand: Cadillac Pages: 20

Brand: Hummer Pages: 502

Brand: PAC Pages: 14

Brand: Kolpin Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands