Chrysler 300 SRT8 2012 Owner'S Manual Download Page 205 | Manualshive

Page: 205 / 557

background image

System can be reactivated by pushing the Electronic
Speed Control ON/OFF button and resetting the desired
vehicle set speed.

To Activate

Push the ON/OFF button. The Cruise Indicator Light in
the Electronic Vehicle Information Center (EVIC) will
illuminate. To turn the system off, push the ON/OFF
button a second time. The Cruise Indicator Light will
turn off. The system should be turned off when not in
use.

WARNING!

Leaving the Electronic Speed Control system on
when not in use is dangerous. You could accidentally
set the system or cause it to go faster than you want.
You could lose control and have an accident. Always
leave the system OFF when you are not using it.

To Set A Desired Speed

Turn the Electronic Speed Control ON. When the vehicle
has reached the desired speed, press the SET (-) button
and release. Release the accelerator and the vehicle will
operate at the selected speed.

NOTE:

The vehicle should be traveling at a steady

speed and on level ground before pressing the SET
button.

To Deactivate

A soft tap on the brake pedal, pushing the CANCEL
button, or normal brake pressure while slowing the
vehicle will deactivate Electronic Speed Control without
erasing the set speed memory. Pressing the ON/OFF
button or turning the ignition switch OFF erases the set
speed memory.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

203

«
...
203
204
205
206
207
...
»

Summary of Contents for 300 SRT8 2012














































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 SRT8 2012

Titanium Series

Brand: Fass Pages: 13

Brand: Mazda Pages: 527

2008 Escalade EXT

Brand: Cadillac Pages: 496

Brand: Ultra-tow Pages: 14

Brand: Mercedes-Benz Pages: 121

Brand: Menabo Pages: 8

Brand: Camtree Pages: 5

2004 Vibe Navigation System

Brand: Pontiac Pages: 44

Brand: Draw tite Pages: 4

Brand: Mercedes-Benz Pages: 329

Brand: Kia Pages: 51

Brand: ULTIMATE SPEED Pages: 6

Brand: Kargo Master Pages: 19

PRIME DESIGN VBR3-FT31B

Brand: Safe Fleet Pages: 12

Brand: Toyota Pages: 600

Sprinter Side Ladder

Brand: FVC Pages: 8

2000 Accord Sedan

Brand: Honda Pages: 320

Brand: Easee Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands