Chrysler 300 SRT8 2012 Owner'S Manual Download Page 341 | Manualshive

Page: 341 / 557

background image

•

Bi-Level Mode

Air comes from the instrument panel outlets and
floor outlets. A slight amount of air is directed

through the defrost and side window demister outlets.

NOTE:

BI-LEVEL mode is designed under comfort

conditions to provide cooler air out of the panel outlets
and warmer air from the floor outlets.

•

Floor Mode

Air comes from the floor outlets. A slight amount of
air is directed through the defrost and side window

demister outlets.

•

Mix Mode

Air comes from the floor, defrost and side window
demist outlets. This mode works best in cold or
snowy conditions.

•

Defrost Mode

Air comes from the windshield and side window
demist outlets. Use Defrost mode with maximum

temperature settings for best windshield and side win-
dow defrosting and defogging. When the defrost mode is
selected, the blower level may increase.

13. SYNC

Press the Sync soft-key to toggle the Sync feature On/Off.
The Sync indicator is illuminated when this feature is
enabled. Sync is used to synchronize the passenger
temperature setting with the driver temperature setting.
Changing the passenger temperature setting while in
Sync will automatically exit this feature.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

339

«
...
339
340
341
342
343
...
»

Summary of Contents for 300 SRT8 2012














































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 SRT8 2012

Brand: Saab Pages: 75

Brand: Camcar Pages: 2

Brand: TATA Motors Pages: 156

For 1985-1992 GM Cars and Trucks 17933

Brand: Edelbrock Pages: 4

Brand: Masterack Pages: 4

Brand: Over Armour Offroad Pages: 5

Brand: H&S Pages: 32

Brand: Xpresskit Pages: 18

Brand: Thule Pages: 3

Brand: ULTIMATE SPEED Pages: 10

Brand: Enduro Pages: 52

Prime Design VBI-FT31B

Brand: Safe Fleet Pages: 12

Brand: PEUGEOT Pages: 232

Brand: Kuda-Phonebase Pages: 3

Brand: Westfalia Pages: 2

Cuda TriOptic 351014F Series

Brand: Federal Signal Corporation Pages: 4

Brand: Kia Pages: 216

Brand: Datsun Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands