Chrysler 300 SRT8 2008, Owner'S Manual

Page: 94 / 482

The following are general phone to UConnect
威
system
pairing instructions:
•
Press the PHONE button to begin.
•
After the
⬙
Ready
⬙
prompt and the following beep, say
⬙
Setup Phone Pairing.
⬙
•
When prompted, after the beep, say
⬙
Pair a Phone
⬙
and
follow the audible prompts.
•
You will be asked to say a four-digit Personal Identi-
fication Number (PIN), which you will later need to
enter into your cellular phone. You can enter any
four-digit PIN number. You will not need to remember
this PIN number after the initial pairing process.
•
For identification purposes, you will be prompted to
give the UConnect
威
system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
•
You will then be asked to give your cellular phone a
priority level between 1 and 7, with 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnect
威
system. However, at any given time,
only one cellular phone can be in use, connected to
your UConnect
威
system. The priority allows the
UConnect
威
system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if priority 3 and priority 5
phones are present in the vehicle, the UConnect
威
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time (refer to
⬙
Advanced Phone
Connectivity
⬙
in this section).
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE