Chrysler 300 SRT8 2008 Owner'S Manual Download Page 92

Page: 92 / 482

Voice Recognition Button

Actual button location may vary with radio.
The individual buttons are described in the
“Operation” section.

The UConnect

威

system can be used with any Hands-Free

Profile certified Bluetooth

威

cellular phone. See the

UConnect

威

website for supported phones. If your cellu-

lar phone supports a different profile (e.g., Headset
Profile) you may not be able to use any UConnect

威

features. Refer to your cellular service provider or the
phone manufacturer for details.

The UConnect

威

system is fully integrated with the vehi-

cle’s audio system. The volume of the UConnect

威

system

can be adjusted either from the radio volume control
knob or from the steering wheel radio control (right
switch), if so equipped.

The radio display will be used for visual prompts from
the UConnect

威

system such as

⬙

CELL

⬙

or caller ID on

certain radios.

Operation

Voice commands can be used to operate the UConnect

威

system and to navigate through the UConnect

威

structure. Voice commands are required after most
UConnect

威

system prompts. You will be prompted for a

specific command and then guided through the available
options.

•

Prior to giving a voice command, one must wait for
the beep, which follows the

⬙

Ready

⬙

prompt or another

prompt.

•

For certain operations, compound commands can be
used. For example, instead of saying

⬙

Setup

⬙

and then

⬙

Phone Pairing,

⬙

the following compound command

can be said:

⬙

Setup Phone Pairing.

⬙

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 300 SRT8 2008



































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 SRT8 2008

Reviews:

Related manuals for 300 SRT8 2008

Brands by name

Popular brands

Chrysler 300 SRT8 2008, Owner'S Manual

Search results

Summary of Contents for 300 SRT8 2008

Reviews:

Related manuals for 300 SRT8 2008

Brands by name

Popular brands