Home
/
Chrysler
/
2010 PT Cruiser
/
Owner'S Manual

Chrysler 2010 PT Cruiser, Owner'S Manual, Page: 306 / 400

Share

Page: 306 / 400

Chrysler 2010 PT Cruiser Owner'S Manual Download Page 306

If it is necessary to use the accessories while being towed
(wipers, defrosters, etc.), the key must be in the ON
position, not the ACC position. Make certain the trans-
axle remains in NEUTRAL.

Towing Without The Key-In-Ignition

Special care must be taken when the vehicle is towed
with the ignition in the LOCK position. A dolly should be
used under the front wheels if the rear wheels are raised.
Proper towing equipment is necessary to prevent dam-
age to the vehicle.

Towing Behind Another Vehicle (Flat Towing with
all four wheels on the ground)

If your vehicle is equipped with a manual transaxle, it
may be towed in a forward direction, at any legal
highway speed, for any distance, if the transaxle is in
NEUTRAL.

If the ignition key is not available, vehicles with auto-
matic transaxles can not be flat towed at any time.

6

WHAT TO DO IN EMERGENCIES

305

«
...
304
305
306
307
308
...
»

Summary of Contents for 2010 PT Cruiser

















































































































































































































































































































































































































Reviews:

No comments